Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hayden hydraulic oil cooler
07-19-2009, 02:39
Post: #19
Hayden hydraulic oil cooler
Ron,

Good to hear your back up and running.

The big A is tough on Birds.

When your ready for that exhaust give me or Steven Birtles a call we have those
exhausts in stock.

Kurt Horvath
95 PT 42
10AC



--- In WanderlodgeForum@yahoogroups.com, Ron Thompson wrote:
>
> Kurt,
>
> Thanks for the input, I will file that link in my bookmarks under RV repair.
I try to save all those kind of links I can get my hands on.
>
> Check out my respons to Fred Hulse. I did find a solution to my problem and
have now logged about 160 miles on the repair and its working just fine. I
wanted out of Fairbanks as quick as I could after being stuck there for 9 days
getting my radiator rebuilt from rock damage, a weld job on my Series 60 exhaust
where it had burned through. Have to see about replacing the whole train when I
get back to Texas. And of course the hydraulic oil cooler problem. I thought I
was going to have to limp all the way to Anchorage to have it rebuilt. But
thanks to a conscientious Bill Hamilton of Alaska RV repair center, we were able
to take it apart and fix a cracked coppper fitting with solder. Works fine too.
That oil cooler has been in there for 14 years. I think I will get another 14
years out of it now.
>
> Thanks for your respons Kurt.
>
>
> Ron Thompson -Waller, Tx.
>
> 1995 WLWB 42'
>
> (cockyfox@...)
>
> --- On Sat, 7/18/09, Kurt Horvath wrote:
>
> From: Kurt Horvath
> Subject: [WanderlodgeForum] Re: Hayden hydraulic oil cooler
> To: WanderlodgeForum@yahoogroups.com
> Date: Saturday, July 18, 2009, 12:01 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi Ron,
>
>
>
> Try this link.
>
>
>
> http://www.haydenin dustrial. com/electra- cool-select. html
>
>
>
> Type C should be close to what your looking for.
>
>
>
> You'll have to meassure the width other than that they all look to have the
same specs.
>
>
>
> Kurt Horvath
>
> 95 PT 42
>
> 10AC
>
>
>
> --- In WanderlodgeForum@ yahoogroups. com, Ron Thompson wrote:
>
> >
>
> > Hi folks its me again. I'm baaaaackkk.
>
> >
>
> >
>
> > I need help again. I am in need of a Hayden Hydraulic Oil Cooler for a 1995
WLWB 42 footer. I have searched the internet but so far have not been able to
locate the two fan model that is present on the 1995 WLWB 42'. Can anyone help
me with a source for that particular Hayden oil cooler.
>
> >
>
> > It cools the hydraulic fluids of the radiator fan and also the power
steering. I have bypassed the cooler by inserting a splice between the input
and output lines. So far no over heating has been experienced but I am only in
Fairbanks and have driven only a few miles. I ran into severe rock damage on
the Alaska highway between Whitehorse, BC and Border City Usa. Took out my
radiator and created a leak in the HAYDEN OIL COOLER. Cost me $2425.00 so far.
I am about 6,000 or more miles from home in Texas and need to get an Hayden Oil
cooler shipped in.
>
> >
>
> > aThe oil cooler was the original one installed at birth for the Bird.
>
> >
>
> > I don't have the model number right in front of me but one of you out there
has been up this road before and might have the source for the cooler right at
hand,.
>
> >
>
> > I am desperate. Now that Bluebird is out of business where do we turn.
Maybe Coach works is monitoring these messages and can help me.
>
> >
>
> > Awaiting an answer from anyone.
>
> >
>
> > Ron
>
> > Ron Thompson -Waller, Tx.
>
> > 1995 WLWB 42'
>
> > (cockyfox@ .)
>
> >
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Hayden hydraulic oil cooler - Ron Thompson - 07-17-2009, 17:45
Hayden hydraulic oil cooler - Ron Thompson - 07-18-2009, 04:03
Hayden hydraulic oil cooler - Kurt Horvath - 07-18-2009, 05:01
Hayden hydraulic oil cooler - Stephen Birtles - 07-18-2009, 05:02
Hayden hydraulic oil cooler - Stephen Birtles - 07-18-2009, 05:08
Hayden hydraulic oil cooler - Kurt Horvath - 07-18-2009, 05:12
Hayden hydraulic oil cooler - Fred Hulse - 07-18-2009, 07:26
Hayden hydraulic oil cooler - Chuck Wheeler - 07-18-2009, 09:11
Hayden hydraulic oil cooler - Ernie Ekberg - 07-18-2009, 09:47
Hayden hydraulic oil cooler - Ron Thompson - 07-18-2009, 13:44
Hayden hydraulic oil cooler - Ron Thompson - 07-18-2009, 13:47
Hayden hydraulic oil cooler - Gregory OConnor - 07-18-2009, 13:52
Hayden hydraulic oil cooler - Ron Thompson - 07-18-2009, 13:55
Hayden hydraulic oil cooler - Ron Thompson - 07-18-2009, 14:01
Hayden hydraulic oil cooler - Fred Hulse - 07-18-2009, 14:07
Hayden hydraulic oil cooler - Ron Thompson - 07-18-2009, 14:15
Hayden hydraulic oil cooler - Ron Thompson - 07-18-2009, 14:23
Hayden hydraulic oil cooler - Fred Hulse - 07-18-2009, 14:45
Hayden hydraulic oil cooler - Kurt Horvath - 07-19-2009 02:39
Hayden hydraulic oil cooler - Gregory OConnor - 07-19-2009, 04:46
Hayden hydraulic oil cooler - Chuck Wheeler - 07-19-2009, 09:44



User(s) browsing this thread: 12 Guest(s)