Aquahot leaked, How would you repair bay floor?

[Ernie Ekberg]

Kurt, I believe underneath your carpet is metal. The carpet used is Ozite unitary backed. You will have to scrape it off. Home Depot, actually, has this material in stock. Ernie Ekberg 83PT40 Wanderlodge Weatherford, Tx 817-475-3991 http://autos.groups.yahoo.com/group/erni...gandrepair --- On Sun, 7/19/09, Kurt Horvath wrote: From: Kurt Horvath Subject: [WanderlodgeForum] Aquahot leaked, How would you repair bay floor? To: WanderlodgeForum@yahoogroups.com Date: Sunday, July 19, 2009, 2:55 PM Need suggestions. My Aquahot has leaked in the past, both fuel & coolant. Now that it's fixed it leaves me with another chore, what to do with the carpet lining in the bay, it's permanently wet and emits a nice fuel odor, especially this time of year. I'm not sure of the condition of the sub floor. You can see that it to has gotten a good soaking. It may also need replacement. The front bay didn't get any fluids on it so it just bay 2&3 on the road side. The Aquahot will have to come out to remove old carpet and install whatever material I need to line the floor with. One thought was to fabricate a tray with a drain similar to what you would place under a washing machine or a water heater to catch and evacuate any fluids in case of an accidental leak. I'd like hear any suggestion you might have. Thanks, Kurt Horvath 95 PT 42 10AC