gen starter

[pattypape]

Hi Bob,

Working on this Onan/Kubota is really difficult.
Most of the coolant hoses, starter,Alternator are on the opposite side.
The Onan is mounted to a steel tray, two bolts each side, Then there are cable
connectors, exhaust, fuel lines and coolant hoses to disconnect to remove the
entire unit. You may try to remove the front two bolts, loosen the rear bolts
and try to tilt the generator forward using a floor jack. I have not tried this
but it may give enough room to access the starter. Keeping in mind that there
are many connections in the read.
Check the easy stuff first, like the battery, cables & grounds.

Bill 88FC Michigan

--- In WanderlodgeForum@yahoogroups.com, "BOB MALONEY" wrote:
>
> are they a simple way to get to the starter on a 87 fc mine set for 4 months
and now does kick in
> tks bob maloney in ky
>