Windows

[Jeff Miller]

I've bought it from BB, a while ago though.

The sliding window can be removed by pulling the black strip out of the
end-aluminum extrusion, removing the two screws (top and bottom),
remove the end aluminum extrusion, slide the glass out of the frame,
bend/spring the empty frame enough to remove from the window, replace
felt, reverse removal procedure. PITA at best. The last time I did
window work I removed the entire window assembly from the coach first
which IMO is easier:
Remove window retainer strip (salon and driver's windows) or pry open
the rubber strip at the seam (rear of the salon), remove inside trim,
push window out at the bottom frame into a waiting helper's hands,
disconnect alarm sensor wires, lower window away, disassemble.

With trying to serviced the window in the coach you risk having to
remove it anyway as re-installing the glass into the frame and hardened
plastic gasket/seal is not easy.

- Jeff Miller


--- In WanderlodgeForum@yahoogroups.com, "Larry holland"
wrote:
> Hello Everyone,
>
> I would like to replace the felt strips that are on the inside of the
> sliding windows, but I am not sure how the windows come out of the
> frames. Any help will be appreciated. If anyone knows where to buy
> the
> (felt?)please let me know.
>
> Thanks,
>
> Larry Holland
> 82FC35 3208T
> Canandaigua, N.Y.