Shop air compressor wont put out more than 110 PSI

[wl89spman]

--- In WanderlodgeForum@yahoogroups.com, Dorn Hetzel wrote:
>
Thanks Dorn- I have the knob maxed out all the way open..My air hoses are all
3/8", should I use a bigger hose?

Thanks
Ed Gardels 89SP
Arlington Texas

> hose length and size can affect how much flow (CFM) a given compressor can
> deliver at a given pressure (PSI), but not the maximum pressure when the
> compressor cuts off. You might check the pressure switch and regulator and
> see if you can set the pressure back higher.
>
> Dorn Hetzel
> 77FC35
> Hogansville, GA
>
> On Mon, Sep 21, 2009 at 4:52 PM, wl89spman wrote:
>
> >
> >
> > My Porter Cable 135PSI 3HP/4GAL wont put out more than 110psi with
> > 50'rubber hose or 30' coiled yellow vinal(I think). It has always been this
> > way since new. No leaks or problems...My new Michlens need 120 psi so now I
> > have to do something. What psi compressor does everybody use?
> > Is there a compressor expert here? Does the length and composition of the
> > hose matter? If so what length and material hose do I need for my 135 psi
> > compressor?The output gauge on the compressor reads 130psi but wont pump up
> > tires past 110psi...
> > Ant help would be appreciated.
> >
> > Ed Gardels 89SP
> > Arlington Tx
> >
> >
> >
>