Gauge lights will not come on

[gregory O]

Wanderlodge put in a large inverter in my 94pt in the genset rad bay. on the
forward wall, left . they look like a brick, white color

I found one died and I used the other one to run all the lights. the rheostats
control the 12 v into the brick inverters

test that the rheostat control has 12V to the input and then test that it is a
voltage sliding scale on the output as wou rotatte the knob. then I would test
that the voltage output is getting to the inverter then test the ac output of
the inverter.

I tested my el light by lighting them up with ac electric from a pepboys
inverter.

Greg
94ptca

--- In WanderlodgeForum@yahoogroups.com, "cape0001" wrote:
>
> DO NOT attach 12 volt dc directly to the dash
> the dash runs on weird cycle high voltage ac. The dc is inverted to this
> by 4 inverters under the dash
> check the grounds on the system then the rheostat controlling the dash
> check for 12 volt dc going into the inverters (Small Blue Cubes marked high
voltage)
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Fred Hulse" wrote:
> >
> > Nelson
> > First thought is the dash dimmer switch was turned down.
> >
> > Fred & Jeanne Hulse
> > Morristown Arizona
> > 1997 Wanderlodge WLWB41
> >
>