Tachometer fix

[ttikalsky]

I cleaned and reasembled the tach drive, no broken parts found. I
started the motor and the gauge appears to be working, but when I rev
the engine, quarter throttle max in neutral, the RPM goes over 3000.
Is this correct? There is no red line on the guage. What RPM are
most owners running? I have a 3208T, 225 HP with the 4.89 gear ratio.

Troy, Waconia MN 1983 FC33


--- In WanderlodgeForum@yahoogroups.com, "ttikalsky"
wrote:
> Time to fix the tachometer. I have only owned the wanderlodge for a
> few weeks, 2 short weekend trips so far, and have finally opened the
> front. Luckily it has a swing radiator, looks like it was modified
> after the original build, probably when the new engine was installed.
> Any way I need to get the fan off, it is an electric fan and I am not
> sure if this was stock I am guesing not because of the "custom" wiring
> block mounted on the front of the motor to power the fan. I have
> removed the large bolt in the center and I can see a shaft with a
> keyway, a bearing and the fan housing. The fan spins freely on the
> shaft or should I say on the bearing. Now how do I remove the fan? I
> am guessing a puller is needed but not sure. Any one famaliar with
> removing this type of fan?
>
> Troy, Waconia MN 83 FC 33