Help! Intertherm blower motor

[williamcharrison]

Thanks Ron, I guess I was hoping for an easy way out.

--- In WanderlodgeForum@yahoogroups.com, "ronmarabito2002"
wrote:
> I'm not familiar with that particular unit, but I can say it
sounds
> like lack of lubrication to the bearings. You might check to see
if
> they have a lube port. If not, you will probably have to replace
> the motor, or have it rebuilt.
>
> R.E. (Ron) Marabito, Dallas, TX 92WB40
> Moderator
>
>
> --- In WanderlodgeForum@yahoogroups.com, "williamcharrison"
> wrote:
> > I am desperate for any info I can get on repairing/replacing the
> > blower motor in the Intertherm a/c unit on my '90WL.
> > The fan runs for about 10-15 minutes then slows down and stalls.
> > If I let it sit for 5 - 6 minutes it will run again for 10-15
> min's.
> > When it first runs it runs at top speed and the drop off to 0 rpm
> > takes about 30 sec's. Same result with a/c on or fan only.
> > Has anyone out there had this same experience? If so can someone
> > tell me how big a job it is to replace/repair the motor and how
> much
> > disassembly is required to access it?