Help! Intertherm blower motor

[fred89sp]

That is correct, 2 Phillips on back and side, 3 on the front. The
inside cover has 2 but they may not be Phillips so take a straight one
on your first trip up. Be gentle with the cover, they get brittle over
the years.


--- In WanderlodgeForum@yahoogroups.com, "williamcharrison"
wrote:
> Thanks Fred,
> When you say remove the cover do you mean the rooftop cover?
>
> --- In WanderlodgeForum@yahoogroups.com, "fred89sp"
> wrote:
> > My knowledge in minimal but I have one Intertherm left on my 89SP
> but
> > the outside cover is starting to come apart.
> >
> > If you remove the cover you will find an access cover that will
> allow
> > you to lubricate the unit and, as I recall, the blower. Do you
> have a
> > copy of the literature that came with the unit? If not, let me
> know
> > and I will see what I have.
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, "williamcharrison"
> > wrote:
> > > I am desperate for any info I can get on repairing/replacing the
> > > blower motor in the Intertherm a/c unit on my '90WL.
> > > The fan runs for about 10-15 minutes then slows down and stalls.
> > > If I let it sit for 5 - 6 minutes it will run again for 10-15
> min's.
> > > When it first runs it runs at top speed and the drop off to 0 rpm
> > > takes about 30 sec's. Same result with a/c on or fan only.
> > > Has anyone out there had this same experience? If so can someone
> > > tell me how big a job it is to replace/repair the motor and how
> much
> > > disassembly is required to access it?