Help! Intertherm blower motor

[Henry Jay Hannigan]

-FRED: you are in luck...I just removed, had rewound and replaced
my blower motor on my 90SO. removal is a piece of cake and I am
just your average spark plug /oil changing guy. I looked all over
for the blower motor in vegas but it was special and too old..had it
rewound for $100. a bit high but what the heck..better than a new
ac unit built in China!!! I did not have any trouble replacing
the motor...it is on top after you take off some covers and remove
left and righ blower fans with a long alen wrench. the motor wires
are color coded but I taped numbers and colors in case I forgot.
from what I heard from rv ac guy, the intertherm is a great unit
compared to the new ones that do not last as long. let me know if
you have any specific questions.
best,
Hank Hannigan
90SP36
-- In WanderlodgeForum@yahoogroups.com, "fred89sp"
wrote:
> My knowledge in minimal but I have one Intertherm left on my 89SP
but
> the outside cover is starting to come apart.
>
> If you remove the cover you will find an access cover that will
allow
> you to lubricate the unit and, as I recall, the blower. Do you
have a
> copy of the literature that came with the unit? If not, let me
know
> and I will see what I have.
>
>
> --- In WanderlodgeForum@yahoogroups.com, "williamcharrison"
> wrote:
> > I am desperate for any info I can get on repairing/replacing the
> > blower motor in the Intertherm a/c unit on my '90WL.
> > The fan runs for about 10-15 minutes then slows down and stalls.
> > If I let it sit for 5 - 6 minutes it will run again for 10-15
min's.
> > When it first runs it runs at top speed and the drop off to 0 rpm
> > takes about 30 sec's. Same result with a/c on or fan only.
> > Has anyone out there had this same experience? If so can someone
> > tell me how big a job it is to replace/repair the motor and how
much
> > disassembly is required to access it?