Generator

[mbulriss]

The genset tray on the 83PT moves in and out courtesy of a hydraulic ram
cylinder. It operates off the same hydraulic motor and oil supply (under the
front entry steps) as the leveling jacks. If the hydraulic motor is running, as
you state, then you are either low on oil (as Art stated) or there is a seal
leak on the cylinder. If you are low on hydraulic fluid, the leveling jacks
should not operate properly either. Is there a puddle of hydraulic oil under
the genset tray? If so, let us know and I'll post how to repair the hydraulic
ram cylinder seals.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX



--- In WanderlodgeForum@yahoogroups.com, "Bill Jowers" <bgjowers@...> wrote:
>
> My generator will not move when I press the in and out button. We can Hear
> the motor running but nothing happens. I assume there is a gear or shaft
> that is the problem.
>
>
>
> Bill
>
> 83 PT 35'wanderlodge 92TDD silver
>
> PCFL
>