Bendix cruise control creeps

[Ralph L. Fullenwider]

Marty:

There is a re build kit for the cc5 cylinder, which sticks a little or acts
slow. Then you may have an o-ring leaking slightly on the set valves.

Is your throttle a little slow acting when you push the peddle?

It does not sound like the control unit. In your manual, you will find a
trouble shooting guide, but were it mine, I would suspect an o-ring leaking
past.

Safe travels,

Ralph and Charolette Fullenwider
"84FC35 "Ruff Diamond"
Duncan, Oklahoma

At 04:08 AM 5/26/2010 +0000, you wrote:
>Hi All
>
>I have an '86 PT40 with the Bendix cruise. Last season it didn't work and
>this winter I gave it the once over (everything worked) but now I have a
>new problem .... it creeps up in speed.
>
>It will run fine for miles, and then all of a sudden we're from 65 to 80
>... sometimes going UP hills.
>
>Anyone else experienced this ?
>
>Is there something I should do to "clear" the memorized speed other than
>using the brakes ?
>
>Marty Spaulding
>'86 PT40
>Kalamazoo
>
>
>