Generator tray won't extend

[Ralph L. Fullenwider]

Greg:

Do you have the front lock handle on your gen set? There is a cut out
switch if the lock is not all the way open.

Safe travels,

Ralph and Charolette Fullenwider
"84FC35 "Ruff Diamond"
Duncan, Oklahoma

At 09:12 AM 8/12/2010 -0700, you wrote:


>Thanks Al - The click is a one time, rather quiet sound. Just like a
>relay being closed. But then nothing happens. I remember the sound the
>ram makes when it reaches full extension is much louder.
>
>Everybody: Is there a fuse somewhere for the mechanism? Anything else I
>could check?
>
>Thanks
>Greg
>1986 PT-40
>
>
>
>On Aug 12, 2010, at 8:26 AM, Al Scudder
><al_scudder@...> wrote:
>
>>
>>
>>the clicking sound is on my BB , but only when the pump is fully
>>expanded. It will also make that clicking when there is a blocked passage
>>for the extention. I found thisd out after a tow that had bent the frame
>>of the cross member
>>
>>Scooter 2000 LX MIchigan
>>
>>
>>----------
>>To: WanderlodgeForum@yahoogroups.com
>>From: gregy1@...
>>Date: Wed, 11 Aug 2010 18:48:47 +0000
>>Subject: [WanderlodgeForum] Generator tray won't extend
>>
>>
>>Several potential problems here. But the first is that the generator tray
>>won't extend. I have re-filled the jack fluid reservoir as one of the HWH
>>leveling jacks had leaked. I replaced the genny battery with a new one as
>>i was getting <12V from the old one and it would not take a charge. Now
>>when I engage the generator tray switch I hear a click sound, like a
>>relay, but no hydraulic pump and no motion on the tray. Ideas?
>>
>>Greg Young
>>1986 PT-40 "Bluefire"
>>Oceanside CA
>>
>
>
>