Rust Conversion and Rust Stop Paints

[Leroy]

POR 15. Use as directed. Rock solid when applied properly. Permanent. Cannot
expose to UV. If exposed it must be coated.

--- In WanderlodgeForum@yahoogroups.com, "jr182pilot"
wrote:
>
> Take a look at this Durabak <http://www.durabakcompany.com/index.htm>
> this stuff, is not just for your truck bed. You can get this with out
> the rubber granules. I will using this in my cargo holds next year.
> Something you need to know, once you put it on, you would have a hell of
> a time getting it off.......Hope this helps...
>
>
> J R & Deane
> Living on the side of the road,
> in the middle of nowhere (New Mexico)
> Bug Smasher: 1982 PT40
> KarKaddy SS/02 Windstar
> Cruiseairs & Roof Airs
> Red 6V92
> Photobucket http://tinyurl.com/cn85dx <http://tinyurl.com/cn85dx>
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "ken.hvac-conserve@"
> wrote:
> >
> > Anyone have long time experience with rust conversion and rust paint
> products and seen them work for 5 plus years?
> >
> > I drive my 84 Pt 40 in the winter when there is salt on the roads and
> live on Chesapeake Bay where there is salt and moisture in the air. And
> I hope to continue using my BB for years to come.
> >
> > 1. Most rust areas that I am dealing with are associated with engine
> compartments, frame and areas where appearance is not critical.
> > 2. Is there any product that will deal with oily surfaces that cannot
> be reached?
> > 3. How long will these products slow down rust?
> > 4. Product cost is not an issue. Labor and experience required for
> surface prep is an issue.
> > 5. Who makes the best products that will deal with structural rust
> issues and provide a durable surface?
> >
> > Tks BC
> >
>