Rear LP furnace wont light

[ronmarabito2002]

Ed: There is a little inspection window that can be opened. Right behind that
is the igniter. Open it and check for ash bridging the gap. The furnace
produces flakes of ash and they can get in the way. Vacumn out the area and
then try it. If you still have no spark, the gap between the electrode and the
gas burner might be too great. I'm going to bet you have ash in the way.

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "wl89spman" wrote:
>
> My rear LP furnace, under all the dresser drawers wont light. Blower comes
on but I dont hear any sparking from the igniter,therefore it never lights the
gas. Gas valve is turned to on, all other heaters work ,also cooktop works. Dash
sw(lp heat) is on.
> My question is 'how do you remove it to check it out(89 SP36)?Have any of
you removed this furnace(NT-16SW).How do get to the elec. connectionin the rear?
> Any advice and or experiences would be welcomed...
>
>
> Thanks
>
> Ed Gardels 89SP
> Arlington
>