onan wiring harness help

[George Lowry]

Mark,

I suggest that you go to the newsgroup, rec.outdoors.rv-travel and
ping Alan Robinson. Alan is in the generator business and knows Onan
generators inside and out. He is very helpful. It seems like the more
knowledgeable people that were here have left or are not answering
tech questions any more...

George Lowry
'95 WBDA 4203 & GM 4106 (for sale)
Spearfish, SD

mw88fc wrote:

> Good morning,
>
> I have an 88 fc with an 8 kw onan.\ That has problems associated with the
wiring harness
> that goes from the onan control board to the gauges inside the coach..
>
>
> When the wiring harness is connected at the genny, the fault breaker trips
after 30 sec.
> The real curious thing is that the genny keeps running with the breaker
tripped. ( I am
> going to test the breaker today, as I think this is a seperate issue?) Anyway,
another
> symptom is the when the wiring harness is connected, the genny runs like it
has a big load
> on.... the engine souds more loaded than it does with both airs running. I
have tested all
> the fault sensor that are located on the generator. and they are working fine.
>
>
> So, My questions are,,,
>
> Does the genny have fault sensors other than the ones on the generator itself?
> If so where are the located, and How do I troubleshoot them?
> Are there any other things I can try or look for?
>
>
> thanks
>
> mark walk
> 88fc
> 310 560 4454
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>