onan wiring harness help

[mw88fc]

Thanks,I sent him an email

mark

--- In WanderlodgeForum@yahoogroups.com, George Lowry wrote:
> Mark,
>
> I suggest that you go to the newsgroup, rec.outdoors.rv-travel and
> ping Alan Robinson. Alan is in the generator business and knows Onan
> generators inside and out. He is very helpful. It seems like the more
> knowledgeable people that were here have left or are not answering
> tech questions any more...
>
> George Lowry
> '95 WBDA 4203 & GM 4106 (for sale)
> Spearfish, SD
>
> mw88fc wrote:
>
> > Good morning,
> >
> > I have an 88 fc with an 8 kw onan.\ That has problems associated with the
wiring
harness
> > that goes from the onan control board to the gauges inside the coach..
> >
> >
> > When the wiring harness is connected at the genny, the fault breaker trips
after 30
sec.
> > The real curious thing is that the genny keeps running with the breaker
tripped. ( I am
> > going to test the breaker today, as I think this is a seperate issue?)
Anyway, another
> > symptom is the when the wiring harness is connected, the genny runs like it
has a big
load
> > on.... the engine souds more loaded than it does with both airs running. I
have tested
all
> > the fault sensor that are located on the generator. and they are working
fine.
> >
> >
> > So, My questions are,,,
> >
> > Does the genny have fault sensors other than the ones on the generator
itself?
> > If so where are the located, and How do I troubleshoot them?
> > Are there any other things I can try or look for?
> >
> >
> > thanks
> >
> > mark walk
> > 88fc
> > 310 560 4454
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >