Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need to replace starting batteries.
05-07-2011, 07:55
Post: #12
Need to replace starting batteries.
Ron, I am not against taking that picture, but a bunch of those cables will look alike once disconnected. Labeling them eliminates the concern over hooking up incorrectly. It also helps you to know that you aren’t missing a cable (fell out of sight behind the batteries) when you think you are done.
Gary
SOB
From: "cockyfox@sbcglobal.net"
Sent: Saturday, May 07, 2011 2:52 PM
To: "WanderlodgeForum@yahoogroups.com"
Subject: Re: [WanderlodgeForum] Need to replace starting batteries.



Take a picture with a digital camera. Much better way and no lost time.

Ron Thompson -Waller, Tx.
1995 WLWB 42'
(cockyfox@...)

--- On Sat, 5/7/11, Gary Smith wrote:

From: Gary Smith Subject: Re: [WanderlodgeForum] Need to replace starting batteries.
To: "WanderlodgeForum@yahoogroups.com"
Date: Saturday, May 7, 2011, 11:17 AM


I don't own a BB, but would advise you to sketch out a diagram of your batteries as they sit in the tray, marking both positive and negative terminal locations. Then, using masking tape or labels, label your cable connections from left to right (for example: L+1, L+2, L-1, etc.), and annotate on your sketch. Be sure to get every cable, regardless of size. This will allow you to get the new batteries oriented properly and reconnect all the cables to the right terminal of the right battery.
Gary
SOB

Sent from Gary's iPhone
On May 7, 2011, at 12:00 PM, "Fred Hulse" <wlmailhtml:/mc/compose?to=fhulse@...> wrote:

Hi Nelson
To buy batteries for your chassis it’s a good idea to buy from a supplier you do business with and will be there for you if you have any warranty issues in the future.
There should be a Cole Hersee battery switch just above the batteries on the firewall you need to turn to the off position before doing any work.Also remove any 110 V
source and turn of the inverter(s).Use baking soda and water for cleaning the tray and cables also.Just remember battery acid is corrosive.
It is also a good idea to take a picture of the setup before you begin in case you are interrupted for any reason.
Fred & Jeanne Hulse
Morristown,Arizona
97 WLWB41

Quote this message in a reply
Post Reply 


Messages In This Thread
Need to replace starting batteries. - nelsons - 05-07-2011, 03:35
Need to replace starting batteries. - Fred Hulse - 05-07-2011, 04:00
Need to replace starting batteries. - Gary Smith - 05-07-2011, 04:17
Need to replace starting batteries. - magnus caeruleus avis - 05-07-2011, 04:19
Need to replace starting batteries. - nelsons - 05-07-2011, 04:34
Need to replace starting batteries. - mbulriss - 05-07-2011, 04:48
Need to replace starting batteries. - nelsons - 05-07-2011, 04:57
Need to replace starting batteries. - Ron Thompson - 05-07-2011, 06:52
Need to replace starting batteries. - Ron Thompson - 05-07-2011, 07:01
Need to replace starting batteries. - Fred Hulse - 05-07-2011, 07:30
Need to replace starting batteries. - nelsons - 05-07-2011, 07:31
Need to replace starting batteries. - Gary Smith - 05-07-2011 07:55
Need to replace starting batteries. - Ron Thompson - 05-07-2011, 11:42
Need to replace starting batteries. - nelsons - 05-08-2011, 02:38



User(s) browsing this thread: 5 Guest(s)