In motion satellite

[g_man1146]

Hi Dick,

Sounds like the dish may be locked onto the wrong satellite. I had that
happen when I moved a long distance with the dish off and then re-
powered. Yours may be different but my book (at the back) shows a
manual acquisition sequence you can follow after plugging the serial
cable from the dish into a laptop. You can "zap" the present settings
and restart or even manually point it by zip code. Other way is to
move with it off and re-power again.

The tech's at KVH are very helpful and will walk you through the
process if you need.

Rich D. '99LXi43'



--- In WanderlodgeForum@yahoogroups.com, "richardfriedkin"
wrote:
> We've got a KVH L in motion satellite dish. The signals coming in are
> strong on transponders 1&2. We get a message that says "antenna
> pointing mismatch." The system says it's updating the guide, and
> that's where it ends. No channels come in. It worked fine in VA. We
> are now in NY State. Any help would be appreciated.
>
> Dick & Sandy Friedkin
> 2004 Wanderlodge
> 2003 PT Cruiser