Fuse for generator slideout.

[sfedeli3]

Art- the circuit is protected with a resetting breaker in the floor of the
generator tray beneath the oil dipstick. Power originates from the hot lead on
the starter, goes to the breaker, then the micro switches on the tray lever/lock
assembly. Then it travels back to a solenoid near the leveling jack pump and
directs hydraulic pressure to the extending ram while the pump is running. I can
email photos of the mechanism if you need them. It's normally hidden by a
protective plate on the front of the genny tray.

Shane Fedeli
85PT40
Hershey, PA

--- In WanderlodgeForum@yahoogroups.com, "artw" wrote:
>
> I'm removing the generator to replace the main seal. The slide in/out
> quit working. Is the punp fuse protected and where is it located?
> I know it could still be the micro switch.
>
>
> Art Weatherly
> Riverside Ca
> '85 PT36
>