Slideout Issue

[davidbrady]

Hi Bill,

There's all the HWH documentation that you'll ever need in our Document Library.

Document Library > House > HWH

Look at page number 10 of this document: HWH Room Troubleshooting

It may be worth a call to HWH to see if it's feasible to have two big guys on the outside pushing in (once the steps outlined earlier are undertaken); HWH may be able to tell you. I've never manually retracted a slide so I don't know how difficult overcoming the hydraulic system would be - you may need to be inventive. I have pushed my living room slide in with the rams disconnected and it was an easy one person job. You can imagine though, even with the T-handles open, you'll have to force hydraulic fluid thru small orifices.

The T-handles are on the retract/extend solenoids which are bolted to an aluminum manifold sitting on top of your hydraulic pump and motor. The whole kit and kaboodle is located in the first basement bay behind the front bulkhead. There's a 2' x 2' access panel to remove.

BTW, there's a transmission neutral switch override in the HWH control box, also located in the first basement bay, streetside. Toggling this will allow you to put the transmission in gear. This is documented in the HWH documentation.