Slide out Pins locked

[jerrymcd]

Hi David, Did you ever hear back from Merrill on his slide issue? Jerry

(08-18-2013 22:41)davidbrady Wrote:  Hi Randy,

The locking pins are hydraulically powered. There's a status panel with LEDs showing the status of each lock pin. I'm not sure where it is in the LX but in the LXi it's in the first basement bay street side above the large HWH aluminum control panel. You can take a peek at the status LEDs to check the status of the locking pins. You do need to partially close the basement door behind you for the LEDs to be activated.

The state of the locking pins are detected by hall effect sensors mounted on each lock pin body. You may need to pull apart some interior panels to get to the lock pin bodies. When you do you should see a round cylindrical plastic device (1/2" dia, maybe 1" long) with 3 wires that's attached to the pin body. These devices sense a magnet attached to the interior sidewalls of the slide body. Make sure that the cylindrical sensors are positioned close to the slide body so they can pick up the signal from the magnet.

Are there any buzzers going off or level indicator lights on the dashboard?

Let me know what you find out and we'll take it from there.