Threaded Mode | Linear Mode

Hisham Amaral · (This post was last modified: 10-19-2013 07:56 by Hisham Amaral.)

(10-18-2013 21:37)dentmac Wrote: Hi Hish,
Who told you that?
I think that is too easy.

(10-18-2013 20:47)Hisham Amaral Wrote: Ross
All you have to do is to restore the system to original configuration is remove the ground wire to the solenoid you will be able to look in the first bay and you see what was changed to the Hadley ECU. I thing the solenoid is installed on number one height control.

Ross
You can look at the system you will find what changed. BB added a solenoid to the Hadley ECU. You can look up in bay one street side and you will find the change, it is very much an after thought, wire are rigged to that solenoid, you can't miss the change.
Hish