Turbo Boost guage

[poolredalligator]

--- In WanderlodgeForum@yahoogroups.com, Dennis Nichols
wrote:
>
>
> At 7/22/2005 07:04 PM, cudjoekeytom wrote:
> >My turbo boost guage isn't working. It worked during my recent
trip
> >from Cincinnat to Orland area, but was not working when I picked
it up
> >to take it to Detroit Deisel Allison. The guage is operated by a
line
> >or hose that runs from the turbo to the guage. FLDDA says it
> >is "probably" a brake in the hose, but they can't say where.
> >
> >Any ideas as to where this hose runs and how to diagnose?
>
> Mine quit working once when the tiny little hose came in contact
with a hot
> exhaust part and melted a hole in it. Look in the most likely
place: where
> FLDDA was working! There's an obvious place where this boost line
attaches
> on the engine (I don't remember where, just that it was obvious).
>
> --
> Dennis Nichols
> '88 WB40 XXV
> "Priscilla"
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.9.2/55 - Release Date:
7/21/2005


My turbo boost guage line is on top of the engine and it is very thin
tubing. When my turbo boost guage stopped working I got to it easily
by way of the access below the bed. Like Dennis, I found a small hole
in the tubing near the fitting that connects the tubing to the
engine.
There was enough slack in the tubing for me to cut off the damaged
portion and reconnect it. Look for thin tubing near the top of the
engine connected with a compression fitting. Good luck.

Gene Marshall, Dickinson, Texas 1988 PT40