No Inverter charge with shore but OK with genset

[dentmac]

Thank you everyone,
I have decided not to start tearing things open (Done that too many times).
I agree/believe/hope that is the weak power at the post. I have checked other posts and they have same power. One maintenance gent said there was another coach in the park with some power problems too...another problem causing Canuck.
Tomorrow , we move . I'll post the results.
Thanks,
Ross

The Oaks at Sacred Rocks
Boulevard CA

(01-22-2015 17:14)cmillsap Wrote:  I'm not familiar with the M450's Multiplex system but in looking at the schematics, the 120vac power sources (Gen & Shore) through the transfer is typical. So the inverters/chargers don't care which is the power source and should work the same on both power sources.

If the Genset is supplying a strong 120VAC and everything works as it should, I would question the power supplied from the shore post.
I would try another shore power source before I would tear into anything in an effort to "fix" the problem. The bus may not have a problem.