Slide 101

[GregOConnor]

Thank you for the info. The lights that I was looking for are the little led lights on the circuit board in the bay. The HWH jacks deploy as expected and make it close to level. I tried adjusting the level and this did not work to deflate the bag and enable slide movement. . behind the aluminum cover for the HWH circuit board in the bay . I did find that the circuit board is powered and the power comes from the hwh pump lug just forward of the bay in the open behind the genset. surprised that the line in is not fused.

I found that the Batt fuse on the circuit board has power but the ign. fuse has no 12v power. I then opened up the key plate for the slide ( in the kitchen cabinet) and found the power side has power but I was using a test light and I believe it is very low voltage. the light hardly illuminated.

I need to find the jack pressure switches and trick them to show pressure then find the bay door switches and trick them into being closed then see if the room slide powers up. Does anyone know the hwh product number of the levelers and the slide? here is a link to the hwh trouble shoot manuals http://www.hwh.com/service34.html