41',43' LXi Gross Axle Weight Ratings

[halkading]

Making some progress with our LX 40 ride and drive-ability. Disconnected the anti sway bar. Reset the alignment for max caster. The eccentric bolts did not have welded washers and they turned without driving them out 1/2". Set adjustable Koni's to soft plus 1/2 turn (one ended up at3/4 turn as it was off 90 degrees at minimum setting) Adjusted tag axle pressure to 45 psi. Your number of 5 psi per flat was right on. As expected counter-clockwise lowered the pressure. Will get back to the scales later this week to see how we ended up for weight distribution.

Hal Kading 2003 LX 40 Las Cruces NM