50DN Alternator Ground Cable

[al perna]

well, so far, so good on the new ground wire to eliminate the overcharging alternator . It was only a 2 hr drive up the North east Extension , but tomorrow will be a better test and I will report back .

I bought a 3/8 16 bolt, and a 47" negative cable at Pet Boys . I used one of the threaded holes on the alternator to bolt down the one end , then connected the other end to the negative battery post . Used a couple wire ties to keep the cable away from anything to hot .

Sorry about the lack of Pics but my phone will not allow them to load on my computer , one day I will get around to figuring it out