Weather Striping

[markkitch]

Does anyone recall changing their front panel fasteners from the below post? Are these a direct replacement or require some modification to make fit?

http://www.aircraftspruce.com/catalog/ha...ey=3259860

Inflation has increased the price a bit.

[i]Posted by Leroy Eckert - 09-28-2006 08:49
Hey Pete: My fasteners are not Dzus as I thought but are Camloc flush mount
phillips head CAD plated studs. They are held in place by a internal tooth
washer. They are easily removed by removing the washer and pulling out the
stud. Removal of the cross pin is not required because the installer carved a
small grove to allow the cross pin to pass through the cover at a 45 degree
angle. I have decided to replace mine with stainless.

PN 2700-4s for stainless-locking pin is 1" long-$1.60ea
PN 2700-4 for CAD-$1.39ea
Internal tooth washer-PN 2600-LW-$.18ea

My bus takes 20ea
The barrel of these studs are about 1/4" in diameter. The phillips screw head
is slightly larger. There are various lengths.

Leroy Eckert
1990 WB-40
Niceville, FL[/i]