AIR HORNS

[dustinbrown]

so tried to get the air horns working yesterday. failed big time. i pulled a speaker above the front door and found the solenoid valve. both wires have 12v going to it. i used my air nozzle and was able to blow the horn. after disconnecting the valve from both lines the pass floor board does not operate any more. are they tied to the same lines? i switched the rocker switch over to the air side and pressed the horn button on the steering wheel. nothing. when i use the floor switch the elec reg horn turns on and does not go off untill i disconnect the wire from the rocker switch? any ideas on this?