changing and where to purchase 2000lxi headlights

[davidbrady]

Hi Larry,

I swapped out my headlights on my LXi. I replaced them with 90mm Xenon HID enclosures which are complete headlamps with bulb, reflector, and ballast. To remove the headlamps you need to reach behind the bumper and undo the 4 T-bolts on each side. They should be only hand tight. Then the entire lexan cover can be removed from the bumper. I used plastic interior panel tools, available at Harbor Freight, to gently pry the molded fiberglass rear housing from the lexan cover. Once separated you can remove the foggy clear outer lens and fit the universal kit to house 90mm HIDs or whatever you choose. I installed these, http://www.rallylights.com/all/headlamps/l/90mm-module, the bi-xenon are pretty trick.

This is what I installed, but I'd probably go bi-xenon now: http://www.rallylights.com/hl68140-hella...-beam.html, and http://www.rallylights.com/hella-90mm-xe...-beam.html

Here's a set of 90mm LED headlights which I might try out on my Prevost: https://www.jwspeaker.com/products/bus-l...-model-90/. I'm no expert but it seems like LEDs are the future.