Misc Electrical issues

[mbulriss]

Urnie,

All 4 on my 2001 are out also but that task is way down the list of things to do. I looked at it casually and it didn’t seem that bad after having done all 4 on my 1991 WB. Any tips or part numbers would be appreciated to save time.

Those things are in a high dirt and corrosion location. On my 91, I did have one connector that was corroded so bad that I couldn’t get a voltage reading. I ended up soaking it in a small plastic bag of vinegar overnite and it cleaned up and started giving me power on the test light so that was a good outcome. The first thing I might suggest if you haven’t already tried is to use a test light to go back a few inches on the wires and see if you get power on the wires. If you’re lucky it may just be the connector end.

FWIW and good luck. Let us know the outcome please.

Thanks,