2001 LXi headlight covering

[RainbowrvGreg]

the oem are different left to right and not a good fit either. I ended up using a screw and button cap to keep them on and melted some tie wire on the back to affix. I removed the lexan and cut some scrap stainless steel. used 1/4 airline split outside of the radius with a blade to cover up my edge.

if you are looking for the black cover the fiberglass would be the way to go and just have it refit by a good fiberglass shop.
I took out the graphics on the front of this bus and painted most of it brown after removing the 3m. plan is to just repaint ever 5 years