Help - Will not start after some body work

[neontwister]

That is a bit more than body work. That connector is rather complicated. I have seen folks take those connectors apart and bend pins when trying to put them back together. Seeing it runs at all I am leaning towards corrosion. That too will eat pins and once disturbed they can break off short.

I would take it apart and look at both half's under a bright light. Maybe a magnifying glass. Have a can of WD 40 or better yet some sort of contact cleaner from boat store. Shame Radio Shack is gone. Look on the back of each connector for any wire that might have broken off and pulled out of the hole. I can't say what the connector is running, but you say it is the only one they took apart. It could be some place totally different, but I am not there and they don't seem to know what they are doing. Asking you for help?
Good luck
Chris Rasmussen
2003 40Lx.