Entrance step

[pattypape]

Hey Scott,

Our step is similar to the troubling shooting guide in the files.
Some earlier air step circuits are different.
Try checking the two ground wires under the air solenoid valve and
the two plug on soleniod electrical connectors on each side of the
same switch. These connections have a tendency to corrode.
This helped our intermittent step.

Bill 88 FC Michigan



--- In WanderlodgeForum@yahoogroups.com, "Scott"
wrote:
> Hey folks..The entrance step on "RUBY" (86FC35) is not
working..the
> step is out. I have been trying to track down the reason for most
of
> the day. It worked fine the last time we used the coach and
> now..nadda..It looks like there is a pin (air operated) that is in
the
> frame of the step and will not move. When I push the jam (door)
> contacts in I hear a click in the transfer compartment (that is
what
> that relay is all about..and the plastic cover is cloudy) I got
the
> downloads from the forum about trouble shooting it..to no
avail ..the
> info (on the forum)is for a SP and not for a FC so the location of
the
> relays,power etc is different. HELP..can anyone give some advise
on
> this situation?? Any/All help would be appreciated
>
> Scott B
> 86FC35 "RUBY"
> Murrells Inlet SC (Right next to heaven..with no step)