Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Building
11-18-2005, 11:51
Post: #3
New Building
We just put in a metal building with a 20 x 60 floor of 6" concrete with rebar;
its only about 5 months old but no cracks as yet. The soil here is almost total
sand and the builder swears that it would hold our 40' PT; which we have now
replaced with a 95 WBWL42 which is heavier by several # and I'm sure glad for
the 6" concrete. Only time will tell if its enough. Also put in water and
septic which is handy. Best luck
Wallace Craig
95WLWB42
Azle, Texas

"Howard O. Truitt" wrote:
I'm getting ready to build a storage building for my 86 8V92 PT40. The
previous owner had kept it in a barn on his farm. I would appreciate
some advise on the concrete pad. I plan on building a 16'x56' building
with 14'x14' roll up doors on each end. I had one builder say to
compact the dirt well and pour 4" of 2000# concrete with fiber the
other says I need to pour 6" of 3000# concrete with wire.
I also plan on putting in a 42" wide by 42" deep by 12' long service
pit.
I would appreciate your imput.
Howard Truitt
Camilla, Ga.
86 8V92 PT40








Yahoo! Groups Links










---------------------------------
Yahoo! FareChase - Search multiple travel sites in one click.

[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 


Messages In This Thread
New Building - Howard O. Truitt - 11-18-2005, 11:05
New Building - ronmarabito2002 - 11-18-2005, 11:36
New Building - Wallace Craig - 11-18-2005 11:51
New Building - Blair - 11-18-2005, 12:22
New Building - Robert Johannesen - 11-18-2005, 13:37
New Building - Gregory OConnor - 11-18-2005, 17:08
New Building - dspithaler@... - 11-18-2005, 21:31
New Building - John Suter - 11-18-2005, 23:44
New Building - Blair - 11-19-2005, 02:08
New Building - Richard Hayden - 11-19-2005, 14:43
New Building - Dan Darst - 11-19-2005, 15:52
New Building - Howard O. Truitt - 11-20-2005, 08:06
New Building - Richard Hayden - 11-22-2005, 15:22



User(s) browsing this thread: 8 Guest(s)