How Thick Is The Roof

[Gregory OConnor]

Joe, If you have any concern, make a blank true radius plate for an
interface between the lodge and the solar panel. finish it with good
paint and use the 3-m double sided tape to hold it down then sheet
metal screw it also.
Greg

--- In WanderlodgeForum@yahoogroups.com, "fwernlein"
wrote:
>
> I would second Davids recommendation for rivet nuts. A solid blind
> hole fastener system. There are types with rubber collars that
will
> provide both the strength and the weatherproof seal you need.
>
> I have used on the bus and my boat with good success. They save a
> significant amount of cussing where you can not easily reach the
back
> side of an installation.
>
> frank w.
> woodbridge, va.
> 85fc33
>
>
> --- In WanderlodgeForum@yahoogroups.com, "joedana0502"
> wrote:
> >
> > I am trying to mount solar panels on the roof of my 1990 WB. My
roof
> > does not have the deck plate. I drilled a whole in the medal roof
and
> > only found foam insulation under it. How do you get anything to
hold
> > on just thin medal.
> >
> > Thanks for any help
> >
> > Joe Blankenship
> > Phoenix,Az
> > 90WB40
> >
>