How Thick Is The Roof

[joedana0502]

Thanks Stephen what you described is what I had in mind of doing.
The 1/8" sheet medal just scared me.
Thanks again

Joe Blankenship
Phoenix,Az
90WB40

--- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
wrote:
>
> You will probably find that the roof is strong enough for the panels
> the regular armour that is placed over the roof in MOST cases is just
> screwed to the roof and well sealed they are not aligned with the
> inside roof ribs
> The method to to attach is to use z shaped Brackets and use the
> factory frame on the panels use short brackets so air cannot get
> underneath the panels and create lift when drivng placing strain on
> the panels make sure holes are well sealed to prevent water intrusion
> and you should have no problems wirng would run down througha vent or
> if you choose a seperate hole with a clamshell cover over a bulkhead
> feedthru again to stop the water intrusion. if you have any questions
> drop me a line
>
> Stephen 77fc35 been there done that no pictures but got the tee shirt
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Bob Lawrence"
> wrote:
> >
> > Do you have the rails on the roof?
> >
> > Bob Lawrence
> > 84 PT36
> > Tacoma, Wa.
> >
> > > I am trying to mount solar panels on the roof of my 1990 WB. My roof
> > > does not have the deck plate. I drilled a whole in the medal
roof and
> > > only found foam insulation under it. How do you get anything to hold
> > > on just thin medal.
> > >
> > > Thanks for any help
> > >
> > > Joe Blankenship
> > > Phoenix,Az
> > > 90WB40
> > >
> >
>