Bad factory wiring: Follow Up

[Scott Forman]

You may have seen my earlier message about what appeared to be factory
wiring incorrectly run that was preventing by chassis heat from
functioning.

After additional wire chasing, I discovered that the problem that had
disabled the chassis heat was simply a wire that had come loose from
the winter/summer switch on the dash. Once re-connected, the chassis
heat works perfectly.

HOWEVER: while everything now works, the wiring at the curb side load
centers, both front and rear, does not match the schematics in the Blue
Box. I have rechecked it several times to verify that I am seeing what
I think I am seeing.

So what does that mean? I have no idea. Just found it interesting and
thought I would share it with the group.

Scott Forman
82 FC35RB
Memphis