Bad factory wiring: Follow Up

[Jeff Miller]

Scott:

Be sure that the wiring diagram you have in the box is for the rear
bath, there is a difference.

Also, the wooden box that covers the breakers should have a small
version of the diagram attached to the inside.

- Jeff Miller
in Holland, MI


--- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
<sforman@r...> wrote:
>
> You may have seen my earlier message about what appeared to be
factory
> wiring incorrectly run that was preventing by chassis heat from
> functioning.
>
> After additional wire chasing, I discovered that the problem that
had
> disabled the chassis heat was simply a wire that had come loose
from
> the winter/summer switch on the dash. Once re-connected, the
chassis
> heat works perfectly.
>
> HOWEVER: while everything now works, the wiring at the curb side
load
> centers, both front and rear, does not match the schematics in the
Blue
> Box. I have rechecked it several times to verify that I am seeing
what
> I think I am seeing.
>
> So what does that mean? I have no idea. Just found it interesting
and
> thought I would share it with the group.
>
> Scott Forman
> 82 FC35RB
> Memphis
>