Back Up System Help

[Dan Leftwich]

I am replacing the video camera and monitor in my 87 FC. I have a
friend of a friend who got me a Honeywell High Res. Miniature Color
Camera with a 2.7-13.5 Auto Iris Lens. He says that the camera needs
very little light to function and has a b/w night function. I then got
a 6.8” LCD Safety Vision Monitor (HYPERLINK
"http://www.safetyvision.com/en/cms/?17"http://www.safetyvision.com/en/c
ms/?17). I bought this unit because of a number of reasons. Primarily
they were size, remote, and the mirror function.

I set the system up and came upon a stumbling point. That is the
monitor will not function in the mirror image unless it has a Safety
Vision camera hooked up to it. In other words it will not reverse the
image if you have mirror function selected. This has got me. I thought
I had researched this fully and now the tech department says I will need
a Safety Vision camera. I called Honeywell tech department and they say
that the polarity must be switched. I asked him if it were something I
could do and the answer was no.

I’ve spent hours on the net looking for some answer but have come up
with nothing. I have read most if not all the posts on the Wanderlodge
sites and the only thing that is discussed is reversing the image on a
system with a CRT screen.

So my question is how do you go about reversing the image for a LCD
screen? Blair or anyone’s help will be much appreciated.

Dan Leftwich
87 35FC Somers NY

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.11/219 - Release Date:
1/2/2006



[Non-text portions of this message have been removed]