Toilet questions

[George Lowry]

Hi Scott,

First, go to <http://www.thetford.com> and look up the service instructions
for your model of toilet. It is quite common for the groove in the
seal to get gunk in it that keeps the valve from closing completely.
It is easy to clean - they even make a special tool to do it but a
paperclip works in many cases.

For removal, the plastic front cover snaps off and the bolts are
behind that. Should be covered in the service instructions.

Hope this helps,

George Lowry
"06 Alpine Apex - Formerly '95 WBDA 4203
Spearfish, SD Now in sunny Gila Bend, AZ.



Scott Forman wrote:

> My FC rear bath has a Thetford toilet that I assume is the original
> one. It works fine, with the exception of the fact that it will no
> longer hold water in the bowl.
>
> 1) Is there a seal or something that can be replaced to stop the
> leaking? Is that a big ordeal?
>
> 2) How is the toilet removed? I plan on putting in a new tile floor
> (and a new toilet if I can't fix this one). Where are the bolts?
>
> Thanks
> Scott Forman
> 82 FC35RB
> Memphis
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>