Water Leaks!

[Bruce Morris]

Thanks Greg. I saw those and the write up said they had been tested carefully
under all conditions. But when I first looked at them they didn't look as
substantial as the compression fittings and this is a job I only want to do
once!

Bruce Morris (919)872-7635 Raleigh, NC
Webmaster - Wanderlodge Owners Online
1983 WL FC35RB

FMCA: 7142s Ham Radio: KI4ME
Vietnam Vet - 1966-67 'Doc' (Navy Corpsman) 3rd MarDiv
----- Original Message -----
From: pbe43
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, March 05, 2006 9:08 PM
Subject: [WanderlodgeForum] Re: Water Leaks!


Pex makes a connector that works like copper tubing connector. No
ferrel needed. The pex connectors come in all configurations. elbows,
unions. I have used them for years. Cut tubing slide nut over tubing
push fitting into tubing screw nut till it is tight. Just to make
sure this would work, i heated water in tubing to 175 degrees and 100
psi no leaks and no failures. Did this right the water heater outlet
line. 6 years later no problems, and they work in cramped spaces, no
need for the long handle crimpers. Also much less costly.
Greg








SPONSORED LINKS Recreational vehicles Wanderlodge Automotive maintenance
Recreational vehicle dealer Used recreational vehicles Automotive
radiators


------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a.. Visit your group "WanderlodgeForum" on the web.

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]