Chassis Heaters hose

[Mike Hohnstein]

Been there done a lot of that. 1" is the size. I buy the stupid expensive
silicone hose from NAPA. It's like 7 bucks a foot.
I did have a failure with it on the truck, I suspect it was due to too tight a
run, piece needed an additional inch of length, other than that no problems.
You need to use the double wrap clamps, the silicone cuts easy, but that aside,
it's supposed to last a long time. All the under side hose was replaced on my
FC, fortunately they used the silicone product. My recirc pump leaked, replaced
with a Kysor item, better than the original, about 150 bucks.
Mike Hohnstein
----- Original Message -----
From: Jay Darst
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, March 05, 2006 8:15 PM
Subject: [WanderlodgeForum] Chassis Heaters hose


Does anyone know what inside diameter hose is used to supply engine
coolant/water/antifreeze to the chassis heaters in our Birds?

Is there a quality of hose that is considered to be the "best"?

I have heard talk of a silicone impregnated hose...but have not been
able to find true life experiences with it.

Has anyone replaced ALL of these hoses? Am considering replacing ALL
of these hoses. I'm sure it will be a really big job. Just don't wanto
to be fixing them in the wrong place at the wrong time or 1 today
another tomorrow, etc.

Thanks in advance
Jay Darst
85PT40
Springfield, IL





SPONSORED LINKS Recreational vehicles Wanderlodge Automotive maintenance
Recreational vehicle dealer Used recreational vehicles Automotive
radiators


------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a.. Visit your group "WanderlodgeForum" on the web.

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]