Sporlan Water Valve- Changeout

[fwernlein]

--- In WanderlodgeForum@yahoogroups.com, "Stephen H" <share@...>
wrote:
>
Stephen, I have not replaced the full valve, but was able to get a
repair kit and replace the innards. Easy to do. Works great. I
followed the instructions provided by Ralph F, which at the moment,
I cannot seem to find. Basically, you likely need to clean or
replace the inner seal "disk".

Links are hard to paste in Yahoo so search for Sporlan.com and you
will get the company, and there are downloads for parts. I'll stick
the service/part sheet in the files here and at Wanderlodge FC in a
few moments. Good luck.

Frank
85FC33


> Has anyone ever replced one of these? Now that all my water lines
are
> repaired- and I have pressure, the valve that is used to fill the
> fresh tank is obvously not working. EWhen I hook up city water, it
> starts to fill the tank- without regard to the valve switch on or
off.
> I can hear the valve clicking and trying to work, but it does not.
The
> water pump also is affected by this- because it does not seal the
> loop, and lets water bypass around in a circle.
>
> I have even thought about seeing if there was a type of manual
valve
> with a push/pull type cable to open and close the connection.
> Help??!
> Stephen
> 81 FC-33SB
> Plant City, FL
>