Broken valves and broken dreams
|
03-16-2006, 13:45
Post: #4
|
|||
|
|||
Broken valves and broken dreams
I have a 78 FC 33 with a non turbo 3208. My mechanic
says to keep it under 2500 however that is also around 55-60. I have others tell me that work on Cats that those motors love to rev.... i am also confused??? Help Chris 78 FC 33 Palmdale, ca "Seguro" --- Mike Hohnstein <MHOHNSTEIN@...> wrote: > Hmm, 2200 is 55 in your "vehicle", sounds like > "around" 2 grand to me. Mebbe you need a hobby? > MH > ----- Original Message ----- > From: Jon > To: WanderlodgeForum@yahoogroups.com > Sent: Thursday, March 16, 2006 6:32 PM > Subject: [WanderlodgeForum] Re: Broken valves and > broken dreams > > > --- In WanderlodgeForum@yahoogroups.com, "Mike > Hohnstein" > <MHOHNSTEIN@...> wrote: > > > > It should be noted that BlueBird recommended and > I quote; Keep it > around 2000 rpm. The recommendation is for the > 3208. Cat calls 2400 > rpm in marine applications, "continuous cruise > speed". > > Some people think it's wise to check valve > adjustment every 50k > miles, some think that's too much. I check it > more often as I fear > broken parts and I DO NOT EVER take short cuts > with my vehicles of > any kind. > > However, ignorance is bliss for most folks and > occasionally the > bite in the butt from reality hurts. > > Weak valve springs is the most common cause of > valve failure, > springs can lose tension in storage. At rest, some > valves are open at > max lift and some are closed. Those that are open > can take a set and > lose closing strength, this allows the valve to > bounce in operation, > compound the problem by running 2700/2800 rpm and > some times stuff > breaks. > > Watch that valve lash and check the valve spring > tension regularly, > other wise, keep your fingers crossed. Ain't > diesels fun? > > Mike Hohnstein > > Germantown, WI > > 83FC35 > > > > [Non-text portions of this message have been > removed] > > > Just one nagging question and that concerns the > chart on the Vintage > Bird site! it states that at 2000 RPM' at 3208 n/a > engine in a F/C > unit speed will be 48 MPH. Now lets get real about > keeping it at 2000 > RPM's and going down a freeway. Do you think when > these coaches came > out that the Bluebird Corporation stated in there > factory manuals > that there motor coaches would last allot longer > if they were only > driven under 50 MPH? I might be different than > most drivers but I try > to keep my speed at 55 but not 48 mph on the > freeway. Does anyone > have a drivers manual for one of these old units? > it would be > interesting to check it out and see what corp. > said in those days. > > > Jon > 1978 Wanderlodge > Bremerton Washington > > > > > > > > > > SPONSORED LINKS Recreational vehicles Wanderlodge > Automotive maintenance > Recreational vehicle dealer Used > recreational vehicles Automotive radiators > > > ------------------------------------------------------------------------------ > YAHOO! GROUPS LINKS > > a.. Visit your group "WanderlodgeForum" on the > web. > > b.. To unsubscribe from this group, send an > email to: > WanderlodgeForum-unsubscribe@yahoogroups.com > > c.. Your use of Yahoo! Groups is subject to the > Yahoo! Terms of Service. > > > ------------------------------------------------------------------------------ > > > > [Non-text portions of this message have been > removed] > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Broken valves and broken dreams - Mike Hohnstein - 03-15-2006, 13:26
Broken valves and broken dreams - Jon - 03-16-2006, 12:32
Broken valves and broken dreams - Mike Hohnstein - 03-16-2006, 13:35
Broken valves and broken dreams - Mr Chris Valdes - 03-16-2006 13:45
Broken valves and broken dreams - davidkerryedwards - 03-16-2006, 14:51
Broken valves and broken dreams - Mike Hohnstein - 03-16-2006, 15:02
Broken valves and broken dreams - Mike Hohnstein - 03-16-2006, 15:14
Broken valves and broken dreams - davidkerryedwards - 03-16-2006, 15:21
Broken valves and broken dreams - putneyflash@... - 03-16-2006, 15:25
Broken valves and broken dreams - Jon - 03-16-2006, 15:51
Broken valves and broken dreams - davidkerryedwards - 03-16-2006, 17:48
Broken valves and broken dreams - Gregory OConnor - 03-16-2006, 18:04
Broken valves and broken dreams - erniecarpet@... - 03-17-2006, 00:48
Broken valves and broken dreams - putneyflash - 03-17-2006, 14:49
Broken valves and broken dreams - Mike Hohnstein - 03-17-2006, 15:06
Broken valves and broken dreams - Hugh Turner - 03-17-2006, 17:02
Broken valves and broken dreams - Stephen Birtles - 03-17-2006, 17:21
Broken valves and broken dreams - George Witt - 03-19-2006, 00:01
Broken valves and broken dreams - john duke - 03-19-2006, 05:13
Broken valves and broken dreams - George Witt - 03-19-2006, 08:24
Broken valves and broken dreams - john duke - 03-21-2006, 04:37
|
User(s) browsing this thread: 4 Guest(s)