88fc where is the AT solenoid

[csprenger]

(11-18-2014 23:50)GregOConnor Wrote:  I am working on a 88FC for a friend in SanDiego. he has several electrical issues that I've work thru and the last is a gremlin start problem. I was able to have two instances with the no start and confirmed that the shift dash lights blinked on after one failure then I was able to start. I wonder if the at switch shuts down the shift panel thus the Neutral safety switch? . it is confusing what this shuts down. John McG and Shane F blueBird owners gave me some suggestions and I was able to jump past the issues to make it work for the short term. I would like to completely remove the AT solenoid and hard wire or replace it with a BlueSea Breaker/Fuse. then make the AT dash switch useless. I am hopeful that hardwire thru the AT S will allow me to disable the jump around and return the bus to engineered spec (other than AT)
Does anyone know where the AT Solenoid is on a 1988 FC

Greg,
Please keep all of us posted when you determine the AT bypass. I'd like to bypass ours. Thanks.

Curt