Back home from a road trip and a power steering question.

[Stephen Birtles]

without looking Idont know exactly what is on there at the reservoir
end but if it was high pressure it would be crimp if low pressure it
would br barbed i do believe the resevoir has a fitting on it that
would preclude machined or crimped ends I will loook later
whenit cools down
Stephen 77fc35



--- In WanderlodgeForum@yahoogroups.com, "davidkerryedwards"
wrote:
>
> Did you replace them with crimped fittings all the way around? The
> barbed fittings at my reservoir have been seeping, the barbed
> reservoir fitting at the pump leaks and I assume (?) the return hose
> from the steering box is just a barbed fitting also and it leaks since
> there's a stain under that location everytime I stop. How long did it
> take you to do the job?
> Wouldn't the routing of the hoses be blind regardless of how you
> accessed the steering box?
>
> Kerry
>
> --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
> wrote:
> >
> >
> > crimped fittings at steering box and crimped fittings at pump
> > barb fittings at resevoir.
> > Stephen 77fc35
> > --- In WanderlodgeForum@yahoogroups.com, "davidkerryedwards"
> > wrote:
> > >
> > > Were your hoses attached with hose clamps or did they have proper
> > > crimped fittings?
> > >
> > > Kerry
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles"
> > > wrote:
> > > >
> > > > We did it that wayon a 77 BUT there is much blind work to do
> > > > You have to be careful when the hoses run down the front and
side of
> > > > the engine you cant really see the placement it did hwoever
make it
> > > > easier to attach the hoses to be the steering box.
> > > > Stephen 77fc35
> > > >
> > >
> >
>