Overheating 3208 in a 90SP36

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Overheating 3208 in a 90SP36

08-10-2006, 12:50

Post: #31

Eric Johnson
Unregistered

Overheating 3208 in a 90SP36

Hello Ernie & Company,
I appreciate all the suggestions on installing a separate transmission cooler.
From the
website Tom recommended as cooler source they recommend a two pass cooler w/
dimensions of 22"X24"X1-1/2" plus a fan. There is quite a bit of space in
between frame
rails about 1/2 way back if you mount it in a horizontal orientation above the
drive shaft
and in front of retarder. Don't understand comments about the rediline
compartment.
You guys thinking to cut the compartment walls away and use the space for the
cooler?
Regards, Eric
84FC35SBWL2

--- In WanderlodgeForum@yahoogroups.com, erniecarpet@... wrote:
>
> I believe the rediline was still in my FC. That is an excellent place for
> another air intake and you Cat would love you for the modification.
>
> Ernie Ekberg
> 83 PT40
> Livingston, Montana
>
>
>
> [Non-text portions of this message have been removed]
>

« Next Oldest | Next Newest »

Messages In This Thread

Overheating 3208 in a 90SP36 - williamcharrison - 08-09-2006, 05:33

Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 05:52

Overheating 3208 in a 90SP36 - Eric Johnson - 08-09-2006, 06:12

Overheating 3208 in a 90SP36 - Eric Johnson - 08-09-2006, 08:40

Overheating 3208 in a 90SP36 - Tom Seitz - 08-09-2006, 09:42

Overheating 3208 in a 90SP36 - Rovers - 08-09-2006, 10:13

Overheating 3208 in a 90SP36 - davidkerryedwards - 08-09-2006, 10:21

Overheating 3208 in a 90SP36 - erniecarpet@... - 08-09-2006, 10:29

Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 14:07

Overheating 3208 in a 90SP36 - Pete Masterson - 08-09-2006, 14:08

Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 14:15

Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 14:22

Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 15:22

Overheating 3208 in a 90SP36 - Eric Johnson - 08-09-2006, 15:31

Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 15:50

Overheating 3208 in a 90SP36 - Gregory OConnor - 08-09-2006, 17:14

Overheating 3208 in a 90SP36 - Tom Warner - 08-10-2006, 00:37

Overheating 3208 in a 90SP36 - Eric Johnson - 08-10-2006, 01:06

Overheating 3208 in a 90SP36 - Tom Warner - 08-10-2006, 01:48

Overheating 3208 in a 90SP36 - pattypape - 08-10-2006, 02:14

Overheating 3208 in a 90SP36 - dthollis1961 - 08-10-2006, 02:47

Overheating 3208 in a 90SP36 - Scott - 08-10-2006, 04:49

Overheating 3208 in a 90SP36 - davidkerryedwards - 08-10-2006, 05:03

Overheating 3208 in a 90SP36 - erniecarpet@... - 08-10-2006, 06:12

Overheating 3208 in a 90SP36 - erniecarpet@... - 08-10-2006, 07:48

Overheating 3208 in a 90SP36 - erniecarpet@... - 08-10-2006, 09:42

Overheating 3208 in a 90SP36 - erniecarpet@... - 08-10-2006, 09:46

Overheating 3208 in a 90SP36 - Scott - 08-10-2006, 11:00

Overheating 3208 in a 90SP36 - Gardner Yeaw - 08-10-2006, 11:10

Overheating 3208 in a 90SP36 - pattypape - 08-10-2006, 12:16

Overheating 3208 in a 90SP36 - Eric Johnson - 08-10-2006 12:50

Overheating 3208 in a 90SP36 - Eric Johnson - 08-10-2006, 13:01

Overheating 3208 in a 90SP36 - davidkerryedwards - 08-10-2006, 13:21

Overheating 3208 in a 90SP36 - Eric Johnson - 08-10-2006, 14:47

Overheating 3208 in a 90SP36 - Scott - 08-10-2006, 16:18

Overheating 3208 in a 90SP36 - Howard O. Truitt - 08-10-2006, 23:17

Overheating 3208 in a 90SP36 - Scott - 08-11-2006, 03:49

Overheating 3208 in a 90SP36 - Jeff Miller - 08-11-2006, 13:50

Overheating 3208 in a 90SP36 - Jeff Miller - 08-11-2006, 14:05

Overheating 3208 in a 90SP36 - Gardner Yeaw - 08-11-2006, 14:26

Overheating 3208 in a 90SP36 - Eric Johnson - 08-11-2006, 14:50

Overheating 3208 in a 90SP36 - Jim - 08-11-2006, 16:27

Overheating 3208 in a 90SP36 - Scott - 08-12-2006, 02:39

Overheating 3208 in a 90SP36 - Gregory OConnor - 08-12-2006, 03:38

Overheating 3208 in a 90SP36 - Stephen Birtles - 08-13-2006, 08:39

User(s) browsing this thread: 2 Guest(s)