Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Overheating 3208 in a 90SP36
08-11-2006, 14:05
Post: #39
Overheating 3208 in a 90SP36
The turbo engine could use a tranny cooler in more extreme
conditions, but I felt that the cooler installation in Ernie's
old 'bird, an air/oil cooler on the bottom surface of the RF
compartment with a rock-guard was an excellent addition on the outlet
of the radiator-cooler. With the 250hp, 4.63:1 gears, towing, and a
lead-foot I never saw alarming temperatures in that rig running 15psi
boost on any mountain I could find. The airflow under that
compartment is excellent, and high-pressure (high-density), enough
that you'll notice the foam insulation is eroded away on those
compartments in many coaches. The air there is pressurized by the air
trying to get around the front of the moving coach, and having to
squeeze between the ground and bumper. The differential in speed
between the coach and the road makes the air quite turbulent, also
good for cooling.

Try synthetic fluids also, most people on RV forums agree that it
runs cooler in automatic transmissions.

- Jeff Miller
in Holland, MI


--- In WanderlodgeForum@yahoogroups.com, "Eric Johnson"
wrote:
>
> Hello Ernie & Company,
> I appreciate all the suggestions on installing a separate
transmission cooler. From the
> website Tom recommended as cooler source they recommend a two pass
cooler w/
> dimensions of 22"X24"X1-1/2" plus a fan. There is quite a bit of
space in between frame
> rails about 1/2 way back if you mount it in a horizontal
orientation above the drive shaft
> and in front of retarder. Don't understand comments about the
rediline compartment.
> You guys thinking to cut the compartment walls away and use the
space for the cooler?
> Regards, Eric
> 84FC35SBWL2
>
> --- In WanderlodgeForum@yahoogroups.com, erniecarpet@ wrote:
> >
> > I believe the rediline was still in my FC. That is an excellent
place for
> > another air intake and you Cat would love you for the
modification.
> >
> > Ernie Ekberg
> > 83 PT40
> > Livingston, Montana
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Overheating 3208 in a 90SP36 - williamcharrison - 08-09-2006, 05:33
Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 05:52
Overheating 3208 in a 90SP36 - Eric Johnson - 08-09-2006, 06:12
Overheating 3208 in a 90SP36 - Eric Johnson - 08-09-2006, 08:40
Overheating 3208 in a 90SP36 - Tom Seitz - 08-09-2006, 09:42
Overheating 3208 in a 90SP36 - Rovers - 08-09-2006, 10:13
Overheating 3208 in a 90SP36 - davidkerryedwards - 08-09-2006, 10:21
Overheating 3208 in a 90SP36 - erniecarpet@... - 08-09-2006, 10:29
Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 14:07
Overheating 3208 in a 90SP36 - Pete Masterson - 08-09-2006, 14:08
Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 14:15
Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 14:22
Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 15:22
Overheating 3208 in a 90SP36 - Eric Johnson - 08-09-2006, 15:31
Overheating 3208 in a 90SP36 - Mike Hohnstein - 08-09-2006, 15:50
Overheating 3208 in a 90SP36 - Gregory OConnor - 08-09-2006, 17:14
Overheating 3208 in a 90SP36 - Tom Warner - 08-10-2006, 00:37
Overheating 3208 in a 90SP36 - Eric Johnson - 08-10-2006, 01:06
Overheating 3208 in a 90SP36 - Tom Warner - 08-10-2006, 01:48
Overheating 3208 in a 90SP36 - pattypape - 08-10-2006, 02:14
Overheating 3208 in a 90SP36 - dthollis1961 - 08-10-2006, 02:47
Overheating 3208 in a 90SP36 - Scott - 08-10-2006, 04:49
Overheating 3208 in a 90SP36 - davidkerryedwards - 08-10-2006, 05:03
Overheating 3208 in a 90SP36 - erniecarpet@... - 08-10-2006, 06:12
Overheating 3208 in a 90SP36 - erniecarpet@... - 08-10-2006, 07:48
Overheating 3208 in a 90SP36 - erniecarpet@... - 08-10-2006, 09:42
Overheating 3208 in a 90SP36 - erniecarpet@... - 08-10-2006, 09:46
Overheating 3208 in a 90SP36 - Scott - 08-10-2006, 11:00
Overheating 3208 in a 90SP36 - Gardner Yeaw - 08-10-2006, 11:10
Overheating 3208 in a 90SP36 - pattypape - 08-10-2006, 12:16
Overheating 3208 in a 90SP36 - Eric Johnson - 08-10-2006, 12:50
Overheating 3208 in a 90SP36 - Eric Johnson - 08-10-2006, 13:01
Overheating 3208 in a 90SP36 - davidkerryedwards - 08-10-2006, 13:21
Overheating 3208 in a 90SP36 - Eric Johnson - 08-10-2006, 14:47
Overheating 3208 in a 90SP36 - Scott - 08-10-2006, 16:18
Overheating 3208 in a 90SP36 - Howard O. Truitt - 08-10-2006, 23:17
Overheating 3208 in a 90SP36 - Scott - 08-11-2006, 03:49
Overheating 3208 in a 90SP36 - Jeff Miller - 08-11-2006, 13:50
Overheating 3208 in a 90SP36 - Jeff Miller - 08-11-2006 14:05
Overheating 3208 in a 90SP36 - Gardner Yeaw - 08-11-2006, 14:26
Overheating 3208 in a 90SP36 - Eric Johnson - 08-11-2006, 14:50
Overheating 3208 in a 90SP36 - Jim - 08-11-2006, 16:27
Overheating 3208 in a 90SP36 - Scott - 08-12-2006, 02:39
Overheating 3208 in a 90SP36 - Gregory OConnor - 08-12-2006, 03:38
Overheating 3208 in a 90SP36 - Stephen Birtles - 08-13-2006, 08:39



User(s) browsing this thread: 1 Guest(s)